12V/10A solar system controller,mppt solar charge controller

mppt solar charge controller Specification:12V/24V 10A/15A Product Notes:12V/24V 10A/15A Product Category:Solar panel

12V/10A solar system controller,mppt solar charge controller

Properties of the solar panel controller

1)   The charging current can be adjusted according the accurate measured terminal voltage of the battery, to charge the storage battery progressively full.

2)   Completely automatic control functions including protection against over charge, over discharge, electronic short circuit, overload and reverse connection.

3)   LED indicates the current state of the battery for the operator. The industrial calss chips is used to keep the controller running in the cold, moist and high temperature environment.

4)   The over charge protection, low-voltage protection, reverse connection protection and damage protection for storage battery.

5)   Prevent the charging/discharging from storage battery to the solar panel during night.

6) Singlechip and the exclusive software are used for the intelligent control (the street lamp controller ).

 

Technical parameters of the solar panel controller

 

Type	12V/24Vdc
Rated charging and discharging current	10A/15A
Rated working voltage	12V/24V
The maximum voltage of the solar panel	18V/36V
The maximum power of the solar panel	180W/360W
Working mode with load	Light control and time control
State display	LED
Protection calss	IP30
Operating environment	Temperature:-10-40°C Humidity≤80%
Stop charging voltage	14.4V±0.1/28.8V±0.1
Automatic recovery power-supply voltage	13.8V±0.1/27.6V±0.1
Stop DC output voltage	10.8V±0.1/21.6V±0.1
Recovery DC output voltage	12.8V±0.1/25.6V±0.1
Product size	115×95×38 mm
Weight	125 g

12V/10A solar system controller,mppt solar charge controller