Qingdao Donghaichuangzhan Trading Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Liu Nairui
  • Company Name : Qingdao Donghaichuangzhan Trading Co., Ltd.
  • Tel : 86-0532-68063000,18661626388
  • Fax : 86-0532-68063222
  • Address : Shandong,Qingdao,Beicun of Zhonghan Community, Laoshan, Qingdao
  • Country/Region : China
  • Zip : 266000

12V/24V/48V Solar system charger controller

12V/24V/48V Solar system charger controller
Product Detailed
Related Categories:Solar Controllers
Product Name:Grid-tie wind solar controller 6.5KW Specification:FKJ-GT Product Notes:6.5KW Product Categor:Grid-tie wind sola

 FKJ-GT(Grid-tie)model Product Characteristics

1) The product can be manufactured in accordance with either JB/T6939.1-2004 industrial standard, GB/T 19115.1-2003 national standard or users’ technical requirements.

2) Adopt two sets of control systems, PWM constant pressure system and three-phase load discharging system.

3) PWM constant pressure control is 120% of the rated power of the wind turbine generator. In case of exceeding the scope of PWM constant pressure power, the three-phase load discharging will automatically start. After operation for 10-20 minutes, the three-phase load discharging will stop load discharging and the wind turbine generator will re-start to resume power supply, as a result, safe operation of the overall wind turbine generation system is ensured.

4) Under the conditions of strong or super-strong wind, the controller will conduct constant pressure output and provide DC constant power supply to ensure normal operation of the inverter.

5) Under the condition of disconnected grid-connected inverter, the controller will conduct constant pressure output to wait for inverter resumption.

6) When the power grid is off, the three-phase load discharging of the controller will automatically start and the inverter will stop grid output. When the grid power resumes, the controller stops three-phase load discharging and the inverter will resume power supply.

7) According to the category of the wind turbine generator, the controller can be additionally equipped with mechanical yawing, swing-tai, mechanical or hydraulic, pneumatic, magnetic and other brake functions.

8)The inside of the controller is equipped with lightening protection device. Contain the transit over voltage penetrating into the wind turbine generator within the voltage scope bearable to the equipment or system or conduct the strong lightening current into the earth to avoid equipment damage posed by lightening impact.

9) LED status indication: The frontal panel is equipped with indications of wind turbine generator, load discharging, stop delay time, under pressure, grid power and DC output voltage.

10) Voltmeter indication: Indicate DC output voltage of the controller.

11) The controller is equipped with emergency stop switch; in case of emergency, press down the emergency stop button in the front panel to cut off all power supply of the controller and the wind turbine generator will immediately carry out three-phase load discharging.

12) The controller is equipped with manual three-phase load discharging switch; the user may use it according to actual circumstances. When using this switch, the wind turbine generator will forcibly carry out three-phase load discharging.

  Technical Parameters of the FKJ-GT model Grid-tie Wind Solar Hybrid Controller

Type

6.5KW

Wind power

5KW

Solar panel power

1.5KW

Function

rectifier ,control

Operating environment

Temperature -10-40°C,humidity≤80%

PWM constant pressure voltage

≥380Vdc

3-phase load voltage of the wind turbine

410±5Vdc

Time-lapse of the wind turbine 3-phase load

12-20 min

Low-valtage

≤200Vdc

PWM Fuse

16A

Solar Fuse

6A

Fuse of DC output

20A

Size of the controller

500*460*330mm

Weight of the controller

20 Kg

Size of the load

660*510*450mm

Weight of the load

28.5 Kg

12V/24V/48V Solar system charger controller



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.